Nieuw concept CNC buigmachine zonder doorn!

  • Maximum angle of curvature: 180º
  • Minimum radius of curvature: 3 times the pipe diameter.
  • Maximum radius of curvature: 320 mm
  • Automatic rotation speed from 1,1 up 3,5 rpm
  • Repetition on the curve of +/- 0.1 degrees
  • Reinforcement tool post support arm for pipes with diameters over 40 mm included.
  • 400 ml BEND 8 lubricant included.
  • Two bending directions, right or left for easier bending.
  • Quick die change over: Maximum 60 seconds.
  • 4.0 Technology
  • CNC control with 7” touchscreen with more than 20 different languages
  • Safety pedal to the right and left.
  • Side shelving to store tools.
  • All bend dies are made of tempered steel for longer tool life.
  • The counter dies are made of bronze alloys to help prevent markings on the outside of the bent profiles.
  • Stores up to 10,000 programs.
  • Up to 50 different angles on the same piece can be programmed.
  • Dimensions can be programmed in inches or millimeters.
  • Pivot system with automatic unlocking to help remove material.
  • Automatic and programmable spring back correction.
  • Automatic unlocking
  • Automatic and programmable springback
  • Offset head for complex parts.
  • Reinforcement tool post support included
  • Packaging included
  • Motor power: 1.1 KW / 1.5 HP.
  • Electrical voltage: 230V single phase 50/60Hz
  • Optional voltage: 110V single phase 50/60Hz
  • Intensity: 5 A
  • Machine weight: 365 Kg / 805 Ibs
  • A lower pallet bench to transport the machine to the worksite or storage.
  • The CC60 pipe bender is sent completely assembled.

Wil je direct persoonlijk advies?

  • Een demo binnen één werkdag geregeld
  • Gepersonaliseerde demonstratie
  • Deskundig advies voor uw productieproces
Plan een demo Bel direct

Specificaties

Motor power 1.1 KW / 1,5 HP

Aansluiting 230V

Automatische rotatie snelheid: van 0.7 tot 4.5 omw/min

Maximum size on S275 round steel pipe: 60.3 mm of 2”1/4 x 4 mm

Maximum size on aluminum pipe: 60.3 mm x 8 mm / 2.375” x .315”

Maximum size on stainless steel pipe 304 / 316: 60.3 mm x 3 mm / 2.375” x .160”

Maximum size on square tube: 40 x 40 x 4 mm / 1.50” x 1.50” x .160”

Maximum angle of curvature: 180º

Opslag programma voor repeterend werk

https://nargesa.com/en/industrial-machinery/non-mandrel-tube-and-pipe-bender-cc60-cnc?_gl=1*1xzoy8t*_up*MQ..*_ga*MTY2NjkzODEuMTcyNTYyMDgzMQ..*_ga_ZBFLFG5XBP*MTcyNTYyMDgzMC4xLjEuMTcyNTYyMDg0NC4wLjAuMA..

Categorieën: Buigtechniek, Nargesa buigmachines